Monocell unit with centrifugal fan, body in fiberglass reinforced polyester resin.  The filling material for the heat exchanger and the condensate separator is PVC, as for the water distributor and the drain and overflow connections.

The full cone nozzles are made of polypropylene, and are inoccludible.  The splash guards are made of fiberglass.

There are 21 models available for a potential from about 28 to 1500 kW (indicative potential reported for a thermal gradient of 5 °C).

The use of plastic materials makes the product light and permits installation anywhere.

MCT series technical specifications

Filling material in PVC for heightened exchange surfaces Body and basin entirely in incorrodible fiberglass Distribution system in PVC with wide passage polypropylene nozzles, not overloadable Centrifugal motor ventilation system with belt transmission, low noise levels

CASING (body with basin) made entirely of fiberglass reinforced polyester resin, structurally self-supporting and of an exclusive design, with an anti-UV ray protective gel coat external finish.

FILLING MATERIAL (also for heat exchange) composed of panels consisting of auto-extinguishing and inputrescible PVC sheets, thermoformed under vacuum and then attached together, for heighted exchange surfaces.
The filling material thus realized gives the shape, composition and dimensions both to optimize the air/water contact within the tower and the resulting heat exchange process.

CONDENSATE SEPARATOR composed of panels consisting of auto-extinguishing and inputrescible PVC sheets, thermoformed under vacuum and then attached together.
The shape and the dimensions of the panels are designed to minimize the dragging of the water droplets by the air current aspirated by the fan.

SUPPORTS of the filling materials and the condensate separator in plastic material.

WATER DISTRIBUTION SYSTEM made with unified PN 10 pipes and fittings in PVC, consisting of a main collector and one or more threaded fittings to which the spray nozzles are attached.
The system is designed in such a way to guarantee a uniform and homogenous distribution of water to cool the filling material.

SPRAY NOZZLES in isotactic polypropylene, of a static type, self-cleaning and with wide passages.  Of an exclusive MITA design, the 120° spraying angle and the full cone guarantee the perfect perfusion of the filling material.

MANOMETER GROUP composed of a three-way junction, a hydrometer in glycerine with an AISI 304 body for water pressure measurement at its entrance to the tower, and a purge valve to check the water hardness.

HYDRAULIC CONNECTIONS that are threaded to take cooled water, overflow, and floating and bottom unloading reintegration; posted on the water collection basin.

CENTRIFUGAL VENTILATION SYSTEM with transmission, consisting of:

• centrifugal fan with paddles pointed forward, in galvanized sheet steel
• waterproof electric motor (IP 55 protection), B3 design, F class insulation, tropicalized wrapping, multi-tension (V 220/240 – 380/415, Hz 50/60), without maintenance
• belt transmission, consisting of pulleys and trapezoidal belts
• AISI 304 stainless steel protective grill, compliant with the existing safety standards

NUTS AND BOLTS in AISI 304 stainless steel.