TOWER BODY realized through a supporting structure in sections of after-fabrication hot-dip galvanized steel, with lateral reinforcement consisting of sandwich panels of 22 mm thickness in fiberglass reinforced polyester resin and covered with an isophthalic anti-UV ray protective gel coat.
The seal between the supporting structure and the panels is guaranteed by a special bituminous sealing gasket.
There are also condensate separating panels housed in the superior part of the body, with respective supports in hot-dip galvanized steel.  The tower body is also equipped with a series of one or two manholes consisting of doors of generous dimensions in polyester resin and a fastening frame in hot-dip galvanized steel, to ensure the inspection of and access to the interior of the tower.

PERIMETER FRAME WITH FILLING MATERIAL SUPPORT made of high-thickness after-fabrication hot-dip galvanized steel, placed at the base of the tower body and fixed to it to render the entire structure more rigid.

SUPERIOR COVER of a flat type in textured after-fabrication hot-dip galvanized sheets.

FILLING MATERIAL (also for heat exchange), K 19 type, composed of panels consisting of auto-extinguishing and inputrescible PVC sheets, thermoformed under vacuum and then attached together.
The filling materials thus realized gives the shape and dimensions both to optimize the efficiency of the air/water contact and the resulting heat exchange process.

WATER DISTRIBUTION SYSTEM made with unified PN 10 pipes and fittings in PVC, and with polypropylene tangential spray nozzles, obtained through injection molding on exclusive proprietary MITA dies.
A group including a manometer for checking the entrance water pressure and a purge valve are supplied with the water distribution system.

CONDENSATE SEPARATOR that is double-fold, composed of panels consisting of auto-extinguishing and inputrescible PVC sheets, thermoformed under vacuum and then attached together.
The shape and the dimensions of the panels are designed to minimize the dragging of the water droplets by the fan.

AXIAL VENTILATION SYSTEM consisting of:

• one or more support rings with motor holding seat, in after-fabrication hot-dip galvanized steel, complete with protection net in AISI 304 stainless steel
• one or more aluminum blade fans with a wing profile, adjustable when still, united by a central hub directly coupled to the motor driveshaft
• one or more waterproof electric motors (IP 55), F class insulation, with tropicalized wrapping, multi-tension and multi-frequency.

In the version with a basin, the following are also included:

INFERIOR SUPPORT STRUCTURE made with sections of after-fabrication hot-dip galvanized steel.

SPRAY NOZZLES in fiberglass reinforced polyester resin, of an exclusive design.

COOLED WATER COLLECTION BASIN built entirely of fiberglass reinforced polyester resin and complete with drainage, reintegration and overflow connections.