PMS series special versions
|
IMPLEMENTATION |
APPLICATION |
|
|
 |
GS |
Water that is dirty, has solids in suspension, or has fibrous or filamentous entrainments. The distribution of water on the exchange material is based on the "splash" concept (the crashing of droplets). |
|
ATT |
Water with a temperature between 55°C and 75°C, with occasional peaks up to 80°C (in this case, we recommend the adoption of a tower body in bisphenolic resin). |
|
GS-ATT |
Water that is dirty, has solids in suspension, or has fibrous or filamentous entrainments. The distribution of water on the exchange materials is based on the "splash" concept (the crashing of droplets). Water with a temperature between 55°C and 75°C, with occasional peaks up to 80°C (in this case, we recommend the adoption of a tower body in bisphenolic resin). |
|
N |
Water that is murky, or with modest physical pollution from a dusty source, with temperatures not exceeding 55°C. |
|
N-ATT |
Water that is murky, or with modest physical pollution from a dusty source, with a temperature between 55°C and 75°C, with occasional peaks up to 80°C (in this case, we recommend the adoption of a tower body in bisphenolic resin). |
|
SNOW |
Low external temperatures (Nordic countries, snow systems). |
|
|
IPARIFŰTÉS KFT.
1106 Budapest, Maglódi út 16.
Telefon: 433 2612
Fax: 431 8349
This module can not work without the AcyMailing Component
|
